02073540460 | 07712507601 info@azplumbingcontractors.co.uk

If you are a landlord, you have probably come across the term "CP12" — but what exactly is it, and do you legally need one? This guide explains everything you need to know about gas safety certificates in plain English.

What is a CP12 certificate?

A CP12 — properly called a Landlord Gas Safety Record — is the official document issued after a Gas Safe registered engineer inspects the gas appliances in a property. The name "CP12" comes from the original form number used for the certificate, and the term has stuck.

The certificate confirms that all gas appliances, flues and pipework in the property have been checked and are safe to use.

Do I legally need a CP12?

If you are a landlord renting out a property in England, Wales or Scotland, then yes — a CP12 is a legal requirement. Under the Gas Safety (Installation and Use) Regulations 1998, landlords must:

  • Have all gas appliances and flues checked for safety every 12 months
  • Use a Gas Safe registered engineer to carry out the check
  • Provide tenants with a copy of the certificate within 28 days of the check (or to new tenants before they move in)
  • Keep records of each safety check for at least two years

Failure to comply can result in significant fines and, in serious cases, prosecution. More importantly, gas safety checks save lives by identifying carbon monoxide risks and faulty appliances.

Do homeowners need a CP12?

If you own and live in your own home, you are not legally required to have a CP12. However, an annual gas safety check is still strongly recommended for your own safety and to keep appliances running efficiently. Many homeowners book a combined boiler service and safety check each year.

What does the engineer check?

During a CP12 inspection, a Gas Safe registered engineer will check each gas appliance for:

  • Correct gas pressure and flow
  • Safe and effective burning of gas (combustion)
  • Proper ventilation and air supply
  • That the flue is clearing products of combustion safely
  • That all safety devices are working correctly
  • Any signs of unsafe operation or carbon monoxide risk

The check usually covers boilers, gas cookers and hobs, gas fires and any other gas appliances in the property.

How long does a CP12 take?

For a typical property with one boiler, the inspection takes around 30 to 45 minutes. Properties with multiple gas appliances will take longer. We can usually issue the certificate on the same day.

How much does a CP12 cost?

A CP12 certificate from AZ Plumbing Contractors is £100 plus VAT on weekdays. If you combine it with an annual boiler service, the package is £200 plus VAT — better value than booking the two separately. Properties with multiple appliances may cost a little more.

What happens if an appliance fails?

If the engineer finds an appliance that is unsafe, they will explain the issue and, with your permission, may turn it off to prevent danger. The certificate will record the appliance as unsafe until the fault is repaired and re-tested. We can usually carry out repairs and re-issue the certificate quickly.

Book your CP12 in North London

AZ Plumbing Contractors are Gas Safe registered engineers based in Islington, providing CP12 landlord gas safety certificates across Hackney, Camden and the surrounding areas. We work with landlords and letting agents and can liaise with tenants directly to arrange access. Learn more about our heating and gas services or call 020 7354 0460 to book.

This article is for general guidance only and does not constitute legal advice. Landlords should refer to the current Gas Safety (Installation and Use) Regulations for their full obligations.