Replacing a boiler can feel like a big disruption, so one of the most common questions we are asked is simply: how long will it take? The honest answer is that it depends on the type of installation, but most installations take one to two days, plus a day for a power flush of the heating system. Here is what to expect.
A straightforward swap: around one day
If you are replacing an existing boiler with a similar model in the same location (known as a like-for-like swap), the job can usually be completed in a single day. This is the most common type of installation and involves removing the old boiler, fitting the new one, connecting it to the existing pipework and flue, and commissioning it.
Changing boiler type or location: around two days
If you are switching from one type of boiler to another, for example from a conventional boiler with tanks to a modern combi, the job is more involved. The engineer may need to remove old tanks from the loft, run new pipework, and reconfigure the system. These jobs typically take two days.
Moving the boiler to a new location also adds time, as it requires new pipework, a new flue position and often electrical work.
What happens on installation day?
A typical boiler installation follows these stages:
- Protection and preparation: we lay down dust sheets and protect floors and surfaces
- Draining and removal: the old system is drained and the old boiler removed
- Fitting the new boiler: the new unit is mounted and connected to gas, water and the flue
- System flush: we clean the system and fit a magnetic filter to protect the new boiler
- Commissioning and testing: the boiler is fired up, tested and safety-checked
- Demonstration: we show you how to use the new boiler and controls
Will I be without heating or hot water?
During the installation itself you will be without heating and hot water, which is why most engineers aim to complete the work in a single day where possible. For longer jobs, we do our best to restore at least some functionality overnight, and we will always let you know in advance what to expect.
What can affect the timescale?
- Removing old tanks and pipework from a conventional system
- Power flushing if the existing system is heavily sludged — allow one additional day
- Upgrading the gas supply pipe if the existing one is too narrow for the new boiler
- Fitting additional controls such as smart thermostats
- Unforeseen issues such as corroded pipework discovered once work begins
A good installer will assess all of this during the initial survey and give you a realistic timescale before the work starts.
Booking your installation
We always carry out a survey before quoting, so you will know exactly how long your installation will take and what it will cost before we begin. There are no surprises on the day.
Boiler installation in North London
AZ Plumbing Contractors are Gas Safe registered engineers based in Islington, installing boilers across Hackney, Camden and the surrounding areas. We provide fixed-price quotes, tidy workmanship and a clear timescale for every job. Find out more about our boiler installation service or call us on 020 7354 0460 for a quote.